Simplicity 1693507 Broadmoor Parts Manual
![Simplicity 1693507 Broadmoor Tractor manual cover](/images/ilpkBNyqNgFmvTTPdmJJDBJE/thumbs/thumb175x175.webp)
The recommended oil type for the Simplicity 1693507 Broadmoor Tractor is SAE 30 for temperatures above 32°F (0°C) and 10W-30 for colder conditions.
To change the mower deck belt, first, ensure the tractor is off and the parking brake is engaged. Remove the mower deck, release the belt tension, and replace the old belt with a new one, following the belt routing diagram. Reassemble the deck.
If the tractor won't start, check the battery connections, ensure there is sufficient fuel, inspect the spark plug for wear or damage, and verify that the safety switches are engaged.
It is recommended to perform maintenance at the start of each mowing season, which includes checking the oil, air filter, blades, and tire pressure. Regular checks should be done every 25 operating hours.
To winterize the tractor, clean the mower thoroughly, change the oil, stabilize the fuel, remove the battery, and store it in a dry place. Cover the tractor to protect it from dust and moisture.
The cutting height can be adjusted by using the height adjustment lever located on the side of the tractor. Move the lever to the desired position to set the cutting height.
Excessive vibration may be caused by imbalanced blades, loose deck components, or damaged pulleys. Inspect and balance the blades, tighten any loose bolts, and replace damaged parts as necessary.
Yes, you can use the tractor for snow removal by attaching a snow blower or snow blade attachment, ensuring the tractor is equipped with tire chains and weights for better traction.
To clean the air filter, remove the filter cover, take out the air filter, and clean it with compressed air or wash it with soapy water if it’s a foam filter. Dry it completely before reinstalling.
Uneven cutting can be caused by uneven tire pressure, a misaligned deck, or dull blades. Check and correct tire pressure, ensure the deck is level, and sharpen or replace the blades as needed.