Simplicity 1693453 Express Parts Manual
![Simplicity 1693453 Express Tractor manual cover](/images/umZbzLHCyCHRWONiGuhbRYgE/thumbs/thumb175x175.webp)
To start the Simplicity 1693453 Express Tractor, ensure the gear shift lever is in neutral, the PTO is disengaged, and the parking brake is set. Turn the ignition key to the 'Start' position until the engine starts, then release it to the 'Run' position.
If the engine fails to start, check if the battery is charged, the fuel tank has fuel, and all safety switches are engaged. Also, inspect the spark plugs for wear or damage.
It is recommended to change the oil every 50 hours of operation or at least once per season. Refer to the owner's manual for specific oil type and grade.
Regularly clean the mower deck to prevent grass buildup, check the blades for sharpness, and ensure the deck is level. Lubricate the spindles and pulleys as per the maintenance schedule.
To troubleshoot uneven cutting, ensure that the tire pressure is equal on all sides, the mower deck is level, and the blades are sharp and not bent. Adjust the deck height settings if needed.
If the tractor runs rough or stalls, check the air filter for clogs, inspect the fuel filter, and ensure the carburetor is clean. Additionally, verify that the spark plug is in good condition.
To replace the drive belt, first disconnect the spark plug wire. Remove the mower deck and the belt covers. Detach the old belt from the pulleys and install the new belt following the same path. Reassemble the components in reverse order.
To adjust the brakes, locate the brake adjustment rod near the rear wheels. Tighten or loosen the adjustment nuts until the brakes engage securely when the pedal is pressed. Test the brakes for effectiveness.
For winter storage, clean the tractor thoroughly, change the oil, add a fuel stabilizer to the tank, and remove the battery to store it in a cool, dry place. Cover the tractor to protect it from dust and moisture.
Before each use, check the engine oil level, inspect the air filter, ensure the tires are properly inflated, and verify that all safety features are functioning correctly. Also, check for any loose bolts or parts.