Simplicity 1693260 Broadmoor Parts Manual

To change the oil, first ensure the tractor is on a level surface. Run the engine for a few minutes to warm up the oil, then turn it off. Place a container under the oil drain plug, remove the plug, and let the oil drain completely. Replace the drain plug and refill with the recommended oil type and quantity.
Check the battery connections and ensure they are clean and tight. Verify that the fuel tank has fuel and the fuel valve is open. Inspect the spark plug for damage or wear and replace if necessary. Ensure the PTO is disengaged and the transmission is in neutral.
Blades should be sharpened after every 25 hours of mowing or when you notice a decrease in cutting performance. Always follow the manufacturer's guidelines for sharpening.
Refer to the owner's manual for the exact tire pressure specification, but typically the front tires should be inflated to around 14 psi and the rear tires to around 10 psi.
Regular maintenance such as changing the oil, replacing the air filter, and keeping the blades sharp can improve fuel efficiency. Additionally, avoid idling the engine for long periods.
To winterize, clean the tractor thoroughly, change the oil, and add a fuel stabilizer. Disconnect the battery and store it in a cool, dry place. Inflate tires to the correct pressure and cover the tractor to protect it from the elements.
Uneven cutting may be due to dull blades, improper tire pressure, or uneven deck level. Check and correct these issues as needed, ensuring the mower deck is level and blades are sharp.
To adjust the mower deck, park the tractor on a flat surface. Use the adjustment lever or knob to set the desired cutting height. Consult the owner's manual for specific instructions on leveling the deck.
Consult the owner's manual for the recommended oil type. Typically, a high-quality SAE 30 oil is suitable for temperatures above 32°F, and SAE 5W-30 is recommended for colder conditions.
Locate the air filter cover, remove it, and take out the old filter. Clean the area to remove any dust or debris, then insert the new air filter and replace the cover. Ensure it is securely fastened.