Simplicity 1693257 Landlord Parts Manual
![Simplicity 1693257 Landlord Tractor manual cover](/images/xgVcFicmtPcbtpRRMkkfcMpU/thumbs/thumb175x175.webp)
To change the oil, first warm up the engine for a few minutes to ensure the oil flows easily. Turn off the engine and remove the key. Place a pan under the oil drain plug, remove the plug, and let the oil drain completely. Replace the drain plug, remove the old oil filter, and install a new one. Finally, refill with the recommended oil type and quantity.
If your tractor won't start, check the battery for charge and ensure all connections are tight. Inspect the spark plug for wear or damage, and replace if necessary. Verify that the fuel tank is full and the fuel filter is clean. Also, ensure the safety switches are engaged and the PTO is off.
Regularly clean the mower deck to prevent grass build-up. Check the blades for sharpness and replace them if they are dull or damaged. Lubricate the deck spindles and check the belt for wear or damage. Adjust the deck height as needed for an even cut.
The Simplicity 1693257 Landlord Tractor is designed to run on regular unleaded gasoline with an octane rating of 87 or higher. Avoid using ethanol blends greater than 10% as it can cause engine damage.
The air filter should be inspected every 25 hours of operation and replaced if it is dirty or damaged. Regular replacement ensures optimal engine performance and fuel efficiency.
To store your tractor, first clean it thoroughly and remove any grass or debris. Change the oil and filter, and fill the fuel tank, adding a fuel stabilizer. Disconnect the battery and store it in a cool, dry place. Cover the tractor with a breathable cover to protect it from dust and moisture.
Uneven cutting can be caused by unlevel deck, dull blades, or tire pressure issues. Check and adjust the deck for levelness, sharpen or replace the blades, and ensure all tires are inflated to the recommended pressure.
Slipping traction can result from worn tires or incorrect tire pressure. Inspect the tread on your tires and replace them if necessary. Make sure all tires are inflated to the correct pressure as specified in the owner's manual.
First, disconnect the spark plug for safety. Remove the mower deck and locate the drive belt. Refer to the diagram in the manual for proper belt routing. Remove the worn belt and install a new one, ensuring it is seated properly on all pulleys before reassembling the deck.
Regularly check the battery terminals for corrosion and clean them as needed. Ensure the battery is securely mounted and the cables are tight. Test the battery charge periodically and charge it if necessary. During long storage periods, disconnect and store the battery in a cool, dry place.