Simplicity 1693089 Regent Parts Manual
![Simplicity 1693089 Regent Tractor manual cover](/images/fUghTzhIhETiIwpebnjXPmSU/thumbs/thumb175x175.webp)
To change the oil, first ensure the tractor is on a level surface. Turn off the engine and let it cool. Remove the oil drain plug and let the old oil drain into a pan. Replace the drain plug, remove the oil filter, and install a new one. Refill with the recommended oil type and quantity. Check for leaks and verify the oil level with the dipstick.
If the tractor won't start, first check the battery connections for corrosion and ensure they are tight. Verify the fuel level and ensure the fuel valve is open. Check the spark plug for wear or damage and replace if necessary. Make sure the safety features, like the seat switch, are engaged. If the problem persists, consult the manual or a professional technician.
The air filter should be checked every 25 operating hours and replaced every 100 hours or annually, whichever comes first. Regular maintenance will ensure optimal performance and longevity of the engine.
The Simplicity 1693089 Regent Tractor is designed to run on unleaded gasoline with an octane rating of 87 or higher. Avoid using gasoline with more than 10% ethanol to prevent engine damage.
To troubleshoot uneven cutting, first check that the tire pressure is equal on all tires. Inspect the mower deck for levelness and adjust if necessary. Check for dull or damaged blades and sharpen or replace them if needed. Ensure the deck is clean and free of debris.
Before storing the tractor for winter, clean the exterior and underside thoroughly. Change the oil and filter, and lubricate all moving parts. Add a fuel stabilizer to the fuel tank and run the engine for a few minutes. Remove the battery and store it in a cool, dry place. Cover the tractor to protect it from dust and moisture.
To adjust the mower deck height, locate the height adjustment lever or knob, usually found near the operator's seat. Move the lever or knob to the desired cutting height, ensuring both sides of the deck are at the same level for an even cut.
If the belt slips off the pulleys, check for proper tension and adjust if necessary. Inspect the belt for wear or damage and replace it if needed. Ensure the pulleys are aligned and not worn or damaged. Check that all belt guides and guards are in place and correctly adjusted.
To replace the spark plug, first disconnect the spark plug wire. Use a spark plug wrench to remove the old spark plug. Check the gap of the new spark plug, adjust if necessary, and install it by hand to avoid cross-threading. Tighten with the spark plug wrench and reconnect the spark plug wire.
The recommended tire pressure for the Simplicity 1693089 Regent Tractor is typically 10-12 psi for the front tires and 8-10 psi for the rear tires. Always refer to the owner's manual for specific tire pressure recommendations.