Simplicity 1692892 Broadmoor Parts Manual
![Simplicity 1692892 Broadmoor Tractor manual cover](/images/kFHeiuXCTTmBEUcBUzsRToEX/thumbs/thumb175x175.webp)
To change the oil, first run the engine for a few minutes to warm it up. Turn off the engine and disconnect the spark plug wire. Place an oil pan under the oil drain valve, open the valve, and allow the oil to drain completely. Replace the oil filter, close the drain valve, and refill with the recommended oil type and quantity.
If your tractor won't start, check the battery connections for corrosion and ensure they are tight. Verify that the fuel tank has fuel and that the fuel shut-off valve is open. Inspect the spark plug for wear or damage, and replace if necessary. Make sure the parking brake is engaged and the safety switches are functioning.
For optimal performance, sharpen the mower blades at least once per mowing season or after 25 hours of use. Inspect the blades regularly for nicks or bends and sharpen or replace them as needed to maintain a clean cut.
Use unleaded gasoline with an octane rating of 87 or higher. Avoid using gasoline with more than 10% ethanol, as it can lead to engine damage and poor performance.
Check that the tire pressures are equal and match the manufacturer's specifications. Inspect the deck level and adjust if necessary. Make sure the blades are sharp and balanced. Clear any debris from the underside of the deck.
Overheating can be caused by a clogged air filter, insufficient oil levels, or debris blocking the cooling fins. Clean or replace the air filter, check the oil level, and clear any obstructions from the cooling fins to resolve the issue.
To adjust the cutting height, locate the height adjustment lever on the side of the tractor. Move the lever to the desired position, ensuring that the setting is suitable for the grass type and condition.
At the start of each season, change the oil and oil filter, check the air filter, inspect and sharpen the blades, check tire pressure, lubricate moving parts, and inspect belts and hoses for wear.
To replace the drive belt, disconnect the spark plug wire. Remove the mower deck and locate the belt routing diagram. Release the tension on the belt, remove the old belt, and install the new belt according to the diagram. Reinstall the mower deck and reconnect the spark plug wire.
Clean the tractor thoroughly to remove grass and debris. Change the oil and add fuel stabilizer to the gas tank. Disconnect the battery and store it in a cool, dry place. Cover the tractor to protect it from dust and moisture, and store it in a dry, sheltered location.