Simplicity 1692775 Broadmoor Parts Manual
![Simplicity 1692775 Broadmoor Tractor manual cover](/images/ndBYZRutydlIqNEIJVUIToRp/thumbs/thumb175x175.webp)
To perform an oil change, first run the engine for a few minutes to warm the oil. Then, turn off the engine and disconnect the spark plug wire. Place an oil pan under the drain plug, remove the plug, and let the oil drain completely. Replace the drain plug, and fill the engine with the recommended oil type and quantity. Finally, reconnect the spark plug wire.
The recommended maintenance schedule includes checking the oil level before each use, changing the oil every 25 hours of operation, inspecting the air filter every 10 hours, and replacing it as necessary. Additionally, blades should be sharpened annually, and belts should be checked for wear regularly.
If the tractor won't start, check the battery connections for corrosion and ensure they are tight. Verify that the fuel is fresh and that the fuel valve is open. Inspect the spark plug for wear or damage and replace if necessary. If the issue persists, consult the user manual or contact a service professional.
Check the tire pressure to ensure it is even on all tires. Inspect the blades for wear or damage and replace if necessary. Ensure the mower deck is level by adjusting the deck height settings. Also, clear any debris from under the deck that might obstruct the blades.
To replace the drive belt, first disconnect the spark plug wire and remove the mower deck. Release the tension on the belt by moving the tensioner pulley, then remove the old belt. Install the new belt by routing it around the pulleys, following the belt diagram. Reattach the mower deck and reconnect the spark plug wire.
Clean the tractor thoroughly to remove any debris. Change the oil and top off the fuel tank, adding a fuel stabilizer. Remove the battery and store it in a cool, dry place. Cover the tractor and store it in a sheltered area to protect it from the elements.
Ensure the blades are sharp and properly balanced. Check the engine RPM to ensure it is operating at the recommended speed. Adjust the cutting height for optimal performance based on the type of grass. Also, mow when the grass is dry to prevent clumping and uneven cuts.
Excessive vibration can be caused by unbalanced or damaged blades. Inspect the blades and replace or balance them if necessary. Check the engine mounting bolts for tightness, and inspect the drive belt for wear or misalignment.
Locate the throttle cable near the carburetor and loosen the adjustment screw. Adjust the cable to ensure it moves freely and provides full throttle control. Tighten the adjustment screw and test the throttle lever for smooth operation.
The recommended oil for the Simplicity 1692775 Broadmoor Tractor is SAE 30 for temperatures above 32°F (0°C) and 10W-30 for temperatures below 32°F (0°C). Always check the user manual for specific oil recommendations and capacity.