Simplicity 1692658 Broadmoor Parts Manual
![Simplicity 1692658 Broadmoor Tractor manual cover](/images/hUkHCKKATzFpbqHEfFrAyixS/thumbs/thumb175x175.webp)
To change the oil, first warm up the engine for a few minutes to thin the oil. Turn off the engine and remove the key. Place an oil pan under the drain plug and remove the plug with a wrench. Allow the oil to completely drain, then replace the drain plug. Remove the oil filter with an oil filter wrench and install a new one. Finally, refill the engine with the recommended oil type and amount.
The Simplicity 1692658 Broadmoor Tractor is designed to run on unleaded gasoline with an octane rating of 87 or higher. Avoid using fuel with more than 10% ethanol as it can cause damage to the engine components.
If your tractor won't start, check the battery connections to ensure they are clean and tight. Verify that the fuel tank has gasoline and the fuel shut-off valve is open. Inspect the spark plug for wear or damage, and replace if necessary. If the problem persists, consult the user manual or contact a professional technician.
The recommended tire pressure for the Simplicity Broadmoor Tractor is typically between 10 to 14 psi for the front tires and 8 to 12 psi for the rear tires. Always refer to the tire sidewall or the operator's manual for the precise specifications.
To adjust the cutting height, locate the cutting height adjustment lever, usually near the operator's seat. Move the lever to the desired height setting, ensuring both sides are set evenly to maintain a level cut.
Regular maintenance includes checking the oil level before each use, changing the oil and oil filter every 50 hours of operation, cleaning or replacing the air filter every 25 hours, and sharpening the mower blades as needed. Refer to the owner's manual for a complete maintenance schedule.
To replace the drive belt, first disconnect the spark plug wire and remove the mower deck. Locate the belt tensioner and relieve the tension. Remove the old belt and install the new one, following the belt routing diagram. Reattach the mower deck and reconnect the spark plug wire.
If the blades are not engaging, check the PTO switch to ensure it is in the 'on' position. Inspect the PTO cable and connections for damage or disconnection. If everything appears intact, the issue may be with the PTO clutch, which may require professional inspection and repair.
To ensure efficient operation, perform regular maintenance, use the correct fuel, keep the air filter clean, and ensure the blades are sharp. Additionally, periodically inspect the belts and blades for wear and replace them as needed.
To winterize the tractor, clean it thoroughly and remove all grass and debris. Drain the fuel tank or add a fuel stabilizer to prevent fuel degradation. Change the oil and oil filter, and remove the battery to store it in a warm, dry place. Finally, cover the tractor with a tarp to protect it from the elements.