Simplicity 1692103 Broadmoor Parts Manual
![Simplicity 1692103 Broadmoor Tractor manual cover](/images/aFGATRwvfJOrRmKZaZqCKfAK/thumbs/thumb175x175.webp)
To change the oil, first ensure the tractor is on a level surface. Turn off the engine and let it cool. Remove the oil fill cap and place an oil pan under the engine. Remove the drain plug and allow the oil to completely drain. Replace the drain plug and refill with the recommended oil type and amount. Finally, replace the oil fill cap.
The Simplicity 1692103 Broadmoor Tractor is designed to run on unleaded gasoline with an octane rating of 87 or higher. Avoid using ethanol blends higher than E10 to prevent engine damage.
Check the battery connections for corrosion and ensure they are tight. Verify that the fuel tank has gas and that the fuel valve is open. Check the spark plug for proper connection and condition. If the problem persists, consult the user manual or a professional technician.
To replace the mower deck belt, first disengage the PTO and lower the mower deck to the lowest position. Remove the belt covers and take off the old belt from the pulleys. Install the new belt following the diagram provided in the manual. Ensure the belt is properly seated on all pulleys before replacing the belt covers.
Excessive vibration may be due to an unbalanced blade. Check for bent or damaged blades and replace them if necessary. Also, ensure all mounting bolts and engine mounts are tight. If the issue persists, consult a professional.
To clean the air filter, first remove the air filter cover. Take out the foam pre-cleaner and paper cartridge. Wash the foam pre-cleaner in warm, soapy water, rinse, and let it dry. If the paper cartridge is dirty, replace it. Reinstall the clean or new components and secure the cover.
Check the tire pressure before each use to ensure optimal performance and safety. Refer to the owner's manual for the recommended pressure settings for both front and rear tires.
To adjust the cutting height, locate the height adjustment lever on the tractor. Move the lever to the desired cutting height position. Ensure the mower deck is evenly adjusted by checking the level on both sides.
Follow the maintenance schedule outlined in the user manual. Regularly check and change the oil, air filter, and spark plug. Inspect the belts and blades, and ensure all bolts are tight. Perform seasonal checks for battery health and tire pressure.
For winter storage, clean the tractor thoroughly and remove all grass and debris. Change the oil and top off the fuel tank with a stabilizer added. Disconnect the battery and store it in a cool, dry place. Cover the tractor to protect it from dust and moisture.