Simplicity 1691056 5216 Parts Manual
![Simplicity 1691056 5216 Tractor manual cover](/images/roBvYHFebMSpWJLpFvmKhIRm/thumbs/thumb175x175.webp)
To adjust the cutting height, locate the height adjustment lever on the side of the tractor. Shift the lever to the desired cutting height position, ensuring the deck is level at the new height before mowing.
The recommended oil type for your Simplicity 1691056 5216 Tractor is SAE 30 for temperatures above 32°F and 10W-30 for temperatures below 32°F. The engine oil capacity is approximately 1.5 quarts.
If your tractor won't start, check the battery connections for corrosion and ensure they are tight. Verify that the fuel tank has fuel, and the fuel valve is open. Inspect the spark plug and replace it if necessary. Finally, check the safety switches, including the seat and brake pedal switches.
Regular maintenance includes changing the engine oil every 50 hours, replacing the air filter annually, sharpening the mower blades as needed, and lubricating moving parts such as the axles and steering components.
To replace the drive belt, first disconnect the spark plug for safety. Remove the mower deck and locate the drive belt on the pulleys. Note the belt routing, then remove the old belt and install the new belt, ensuring it follows the correct path. Reinstall the deck and reconnect the spark plug.
If the blades don't engage, check the PTO (Power Take-Off) switch to ensure it is in the "on" position. Inspect the PTO cable for any damage or disconnection. Additionally, verify that the belt driving the blades is intact and properly tensioned.
To improve fuel efficiency, regularly clean or replace the air filter, maintain proper tire pressure, and ensure the engine is tuned up with fresh spark plugs and oil. Mow with sharp blades and avoid cutting wet grass.
To winterize your tractor, clean the mower deck and remove any grass clippings. Change the engine oil and drain the fuel or add a fuel stabilizer to prevent degradation. Disconnect the battery and store it in a cool, dry place. Cover the tractor to protect it from dust and moisture.
To align the wheels, park the tractor on a level surface and adjust the tie rods. Turn the steering wheel to center the wheels, then loosen the tie rod lock nuts and adjust until the wheels are straight. Tighten the lock nuts to secure the adjustment.
Always wear appropriate safety gear, including hearing protection and sturdy footwear. Ensure that the area is clear of debris and people before mowing. Never bypass safety features, and avoid operating the tractor on steep slopes to prevent rollovers.