Simplicity 1690725 7117S Parts Manual
![Simplicity 1690725 7117S Tractor manual cover](/images/DzQtlRXEYYOIeUDChTpJOfWK/thumbs/thumb175x175.webp)
To start the Simplicity 1690725 7117S Tractor, first ensure that the parking brake is engaged and the PTO is turned off. Insert the key into the ignition, turn it to the 'Start' position, and hold it until the engine starts. Release the key immediately once the engine is running.
If the engine won't start, check the battery connections for corrosion or looseness, ensure there is enough fuel, and verify that the spark plug is in good condition. If the problem persists, consult the tractor's manual or contact a professional technician.
The oil in your Simplicity 1690725 7117S Tractor should be changed every 50 hours of operation or at least once per season, whichever comes first. Always use the type and grade of oil recommended in the owner's manual.
The recommended tire pressure for the Simplicity 1690725 7117S Tractor varies by tire type and usage. Generally, front tires should be inflated to 12-14 psi and rear tires to 10-12 psi. Refer to the owner’s manual for specific recommendations.
Uneven cutting can be caused by a dull blade, improper deck level, or tire pressure issues. Check the blade for sharpness and replace if necessary. Ensure the deck is level and verify that tire pressures are within recommended ranges.
Before storing the tractor for winter, clean off any debris, change the oil, add fuel stabilizer, and remove the battery. Store the battery in a cool, dry place. Inflate the tires to the recommended pressure and cover the tractor to protect it from dust and moisture.
To improve mower deck performance, regularly clean the underside of the deck to prevent grass buildup, sharpen the blades, and check belt tension. Ensure that the deck is properly leveled for an even cut.
Excessive vibration can be caused by an unbalanced blade, loose parts, or worn drive belts. Inspect and balance the blades, tighten any loose components, and replace worn belts as needed.
To change the spark plug, disconnect the spark plug wire, remove the old spark plug using a spark plug wrench, and install the new plug by hand to avoid cross-threading. Tighten with the wrench and reattach the spark plug wire.
When operating on slopes, avoid sudden starts or stops and do not make sharp turns. Always drive up and down the slope, not across, to prevent tipping. Reduce speed and use caution when turning. Refer to the manual for maximum slope recommendations.