Simplicity 1690333 7010 Parts Manual
![Simplicity 1690333 7010 Tractor manual cover](/images/oeZUFJbZMqfxpmvHyVshQhLF/thumbs/thumb175x175.webp)
To perform routine maintenance, regularly check and change the engine oil, clean or replace the air filter, inspect the spark plugs, and lubricate moving parts. Always refer to the owner's manual for specific intervals and procedures.
Check the battery connections, ensure the fuel tank has fresh gasoline, inspect the spark plug for wear or damage, and verify that the safety switches are engaged properly.
Ensure that the mower deck is level and the blades are sharp. Check for any obstructions or damage to the blades and make sure the tire pressure is even on all four tires.
Use clean, fresh, unleaded gasoline with an octane rating of 87 or higher. Avoid using gasoline with more than 10% ethanol.
The air filter should be checked every 25 hours of operation and cleaned or replaced as needed. In dusty conditions, more frequent maintenance may be necessary.
Turn off the engine immediately and allow it to cool. Check the coolant level, inspect for any blockages in the cooling fins, and ensure the fan is operational.
Consider using tire chains or adding wheel weights to improve traction. Ensure tires are properly inflated and use a lower gear when working on slippery or uneven terrain.
Clean the tractor thoroughly, change the oil, add fuel stabilizer to the gasoline, and store the tractor in a dry, covered location. Disconnect the battery if storing for an extended period.
To adjust the cutting height, use the lever or knob located near the driver's seat. Consult the operator's manual for specific instructions related to different cutting height settings.
Secure the tractor on a trailer using heavy-duty straps over each axle. Ensure the tractor is in gear and the parking brake is engaged. Follow all local regulations regarding transport.