Siemens iQ700 SX87Y801BE Instruction Manual

To start a wash cycle, load your dishes, add detergent, and select the desired program on the control panel. Close the door firmly, and press the 'Start' button.
Check if the water supply is turned on and the inlet hose is not kinked. Ensure the door is closed properly and the filter at the water inlet is clean.
To clean the filter, remove the lower rack, twist and remove the filter system, rinse it under running water, and replace it securely.
Ensure the rinse aid is filled, select a drying program, and check the heat settings. Also, make sure the dishwasher is not overloaded.
To reset the dishwasher, press and hold the 'Reset' button for about 3 seconds until the display shows a reset confirmation.
Unusual noises might be due to items touching the spray arms, loose items in the racks, or an overloaded machine. Reposition the items and check for foreign objects.
Clean the spray arms every 3-6 months, or if you notice blockages. Remove the arms, rinse under running water, and clear blocked nozzles with a toothpick.
Regularly clean the filter, check and clean the spray arms, wipe the door seal, and run an empty cycle with a dishwasher cleaner monthly.
No, you should only use dishwasher-specific detergents. Regular dish soap can cause excessive suds and damage the appliance.
Ensure the dishwasher is properly plugged in and the power supply is on. If the issue persists, try resetting the dishwasher or consult the user manual for further troubleshooting.