Seat Alhambra 2020 Owner’s Manual
![Seat Alhambra 2020 manual cover](/images/7e2f2119fa8d7513481dbcde/thumbs/thumb175x175.webp)
To pair your phone with the Seat Alhambra 2020's Bluetooth system, activate Bluetooth on your phone. On the infotainment screen, select 'Phone' > 'Find Devices'. Choose your phone from the list and confirm the pairing code displayed on both devices.
The recommended tire pressure for the Seat Alhambra 2020 is typically 36 psi for the front tires and 38 psi for the rear tires. Always check the driver's door sill for the specific pressure for your vehicle.
To reset the service light on your Seat Alhambra 2020, turn on the ignition without starting the engine. Press and hold the trip reset button, then turn the ignition off. Continue holding the button, turn the ignition back on, and release the button.
The Seat Alhambra 2020 requires fully synthetic 5W-30 engine oil. Always refer to the owner's manual for the exact specification required for your engine variant.
To change the headlight bulb in the Seat Alhambra 2020, open the hood and locate the back of the headlight assembly. Remove the cover, disconnect the wiring harness, and release the retaining clip to remove the old bulb. Insert the new bulb, secure it, reconnect the harness, and replace the cover.
If the battery is dead, try jump-starting the vehicle using jumper cables and another car. Connect the cables in the correct order: positive to positive and negative to ground. Once started, let the engine run for at least 20 minutes to charge the battery.
To enable the child lock on the Seat Alhambra 2020, open the rear door and locate the child lock switch on the edge of the door. Use your key to turn the switch to the lock position. This prevents the rear doors from being opened from the inside.
It is recommended to service your Seat Alhambra 2020 every 12 months or 10,000 miles, whichever comes first. Regular maintenance checks include oil change, brake inspection, and tire rotation.
To check the coolant level, ensure the engine is cool and open the hood. Locate the coolant reservoir and check that the coolant level is between the 'MIN' and 'MAX' marks on the side of the tank. Add coolant if necessary.
If the tire pressure warning light appears, check the tire pressures and inflate them to the recommended levels. If the light remains on after adjusting the pressures, you may need to reset the tire pressure monitoring system through the vehicle's settings menu.