Sealey WPF1 Instruction Manual
![Sealey WPF1 Pump manual cover](/images/gxlsgKJInZBpercCrfZwpcxV/thumbs/thumb175x175.webp)
To install the Sealey WPF1 Pump, connect the inlet and outlet hoses to their respective fittings, ensuring they are secure. Mount the pump on a stable surface using the included brackets, and connect it to a suitable power supply.
Check the power supply to ensure it is providing the correct voltage. Inspect the fuse and replace if necessary. Verify that the pump is not clogged and that all connections are secure.
Regular maintenance should be conducted every 6 months, including checking for wear and tear, cleaning filters, and ensuring all connections are tight.
The Sealey WPF1 Pump is designed to handle clean water and certain non-corrosive liquids. Consult the user manual for specific compatibility information.
Regular maintenance, avoiding the pumping of corrosive or abrasive liquids, and ensuring the pump is not run dry, will help extend its lifespan.
Unusual noises may indicate cavitation or air in the system. Check for any blockages, ensure that the pump is properly primed, and inspect for any loose components.
Turn off the power supply, disconnect the pump, and remove the filter housing. Rinse the filters with clean water to remove any debris before reassembling.
Drain all water from the pump, disconnect it from the power supply, and store it in a dry, frost-free location. Consider lubricating moving parts to prevent rust.
The Sealey WPF1 Pump is designed for intermittent use. Continuous operation may lead to overheating or premature wear. Consult the manual for duty cycle recommendations.
Check for blockages in the inlet or outlet, ensure the pump is properly primed, and verify that there are no leaks in the system affecting pressure.