Sealey WB10 Instruction Manual

To calibrate the Sealey WB10 Balancer, follow these steps: First, ensure the balancer is on a level surface. Turn on the machine and enter the calibration mode as per the user manual. Follow the on-screen prompts to complete the calibration using a calibration weight.
If the Sealey WB10 Balancer does not power on, first check the power cord and ensure it is properly connected to a working outlet. Inspect the fuse and replace it if necessary. If the issue persists, consult the troubleshooting section of the manual or contact Sealey support.
To maintain accuracy, regularly clean the balancer, ensure it is calibrated, and check for wear and tear on moving parts. Store it in a clean, dry environment to prevent damage.
Use the standard wheel weights recommended by Sealey. Ensure weights are clean and not damaged before use to avoid inaccuracies in balancing.
Ensure that the wheel is properly mounted and centered on the balancer. Check the condition of the bearings and the spindle. If vibration persists, inspect the balancer for any mechanical issues.
The Sealey WB10 Balancer is primarily designed for car wheels. Check the user manual or with Sealey support to confirm compatibility with motorcycle wheels or if any adapters are needed.
Calibration frequency depends on usage. For optimal performance, calibrate the balancer once a month or after every 100 uses, whichever comes first.
Always wear safety glasses and gloves when operating the balancer. Ensure the work area is clean and free from obstructions. Follow all operational guidelines in the manual to prevent accidents.
Clean the balancer with a dry cloth to remove dust and debris. Avoid using harsh chemicals. Regularly inspect and lubricate moving parts to ensure smooth operation.
Refer to the user manual for the specific error code explanation and troubleshooting steps. If the error persists, contact Sealey customer support for assistance.