Sealey VS0566 Instruction Manual

To calibrate the Sealey VS0566 Caliper, ensure the tool is cleaned and free from debris. Turn it on, close the jaws completely, and press the zero button to reset the reading to zero.
Check the battery compartment to ensure the battery is correctly installed and replace it if necessary. If the issue persists, inspect the contacts for corrosion and clean them with a soft cloth.
Regularly clean the caliper using a soft, lint-free cloth, and store it in a protective case when not in use. Avoid exposure to excessive moisture or extreme temperatures.
Open the jaws slightly larger than the object, then slowly close them until they gently contact the object. Ensure the object is perpendicular to the caliper jaws to get an accurate measurement.
Ensure the caliper is clean and free from obstructions. Check for wear or damage on the measuring surfaces and recalibrate the device. If problems persist, the caliper may need professional servicing.
Yes, the Sealey VS0566 Caliper can be used for depth measurements. Use the depth rod located on the end of the caliper and ensure it is perpendicular to the surface being measured.
The Sealey VS0566 Caliper typically uses a standard LR44 or SR44 button cell battery. Ensure the correct orientation when replacing the battery.
Press the unit conversion button on the caliper to toggle between metric and imperial measurement units. The display will show the current unit system.
First, check for dirt or debris on the jaws and clean them thoroughly. Recalibrate the caliper by closing the jaws and resetting to zero. If accuracy issues continue, inspect for mechanical damage.
Yes, the Sealey VS0566 Caliper can measure internal dimensions using the upper smaller jaws designed for internal measurements. Ensure the jaws are properly aligned with the object.