Sealey SJBEX200.V2 Instruction Manual
![Sealey SJBEX200.V2 Beam manual cover](/images/JJjKLkNpiLQnLuAoXCGmSwoR/thumbs/thumb175x175.webp)
The Sealey SJBEX200.V2 Beam has a maximum lifting capacity of 2 tons.
Regularly inspect the beam for any signs of wear or damage. Ensure all moving parts are lubricated and that the beam is stored in a dry, clean environment when not in use.
Yes, the beam can be used outdoors, but it is essential to protect it from adverse weather conditions and to store it indoors when not in use to prevent rust and corrosion.
Ensure the load is within the maximum capacity and that the beam is set up correctly. Check for any mechanical obstructions or damage to the hydraulic system. Consult the manual for troubleshooting or contact Sealey support if the issue persists.
Always follow the manufacturer's instructions, use the beam on stable and level ground, and never exceed the maximum lifting capacity. Regularly inspect the beam for any damage before use.
Yes, replacement parts are available. Consult the user manual for part numbers and contact Sealey or authorized dealers for replacements.
Use a high-quality hydraulic fluid as specified in the user manual. Avoid mixing different types of fluids to prevent system issues.
To bleed the hydraulic system, fully open the release valve and pump the handle several times to remove air from the system. Refer to the user manual for detailed instructions.
The Sealey SJBEX200.V2 Beam has dimensions of 2000mm in length, suitable for a wide range of vehicles and applications.
It is recommended to inspect the beam before each use and perform a thorough inspection every six months or after any incident that may affect its integrity.