Sealey SA6004.V2 Instruction Manual

Sealey SA6004.V2 Impact Wrench manual cover
Pages 3
Year 0
Language(s)
English en

Sealey SA6004.V2 Impact Wrench Specification

The Sealey SA6004.V2 Impact Wrench is a robust pneumatic tool designed for heavy-duty automotive and industrial applications. It features a powerful twin hammer mechanism that delivers an impressive torque output of up to 1,220Nm, making it well-suited for loosening stubborn fasteners and performing demanding tasks. The wrench operates at an air pressure of 90psi and has an average air consumption of 11.3cfm, ensuring efficient performance while minimizing energy usage. With a free speed of 7,000rpm, the SA6004.V2 provides rapid and consistent power delivery to meet various operational needs. The tool is equipped with a forward and reverse switch allowing for easy directional changes, enhancing user convenience and efficiency during use. Its ergonomic design includes a comfortable grip that reduces user fatigue during prolonged operation, and a lightweight construction of 2.6kg further aids in maneuverability and ease of handling. The impact wrench connects via a 1/4" BSP air inlet, accommodating standard pneumatic fittings. Additionally, it features a noise level of 99dB(A), which, while noticeable, is manageable with appropriate hearing protection. The Sealey SA6004.V2 Impact Wrench is constructed with high-quality materials to ensure durability and reliability in demanding environments, making it a valuable tool for professional mechanics and industrial technicians seeking a dependable solution for their high-torque applications.

Sealey SA6004.V2 Impact Wrench F.A.Q.

How do I operate the Sealey SA6004.V2 Impact Wrench for the first time?

Ensure the wrench is connected to the correct air supply. Check the torque settings and select the appropriate socket for your task. Press the trigger to operate.

What should I do if the impact wrench doesn't start?

Check the air supply connection and ensure there is sufficient pressure. Inspect the air hose for any leaks or blockages. Make sure the trigger is not obstructed.

How can I adjust the torque settings on the Sealey SA6004.V2?

Locate the torque adjustment dial and rotate it to increase or decrease the torque as desired. Refer to the manual for recommended settings.

What is the recommended maintenance routine for this impact wrench?

Regularly check for air leaks, clean the tool after use, lubricate moving parts, and inspect the wrench for wear or damage. Replace worn parts as necessary.

Can the Sealey SA6004.V2 be used for automotive repairs?

Yes, it is suitable for various automotive applications, including tire changes and engine work, thanks to its high torque output.

How do I ensure safety while using the impact wrench?

Wear protective eyewear and gloves. Ensure the work area is clear, and avoid loose clothing that could get caught in the tool. Use the correct sockets to prevent slippage.

What should I do if the wrench is not delivering enough torque?

Verify that the air pressure meets the tool's requirements. Check the torque setting and adjust if necessary. Inspect the tool for any obstructions or damage.

How can I clean and store the Sealey SA6004.V2 properly?

After use, wipe the tool with a clean cloth to remove dust and debris. Store it in a dry, secure place to prevent corrosion or damage.

Is it possible to use the impact wrench with an extension cord?

Since it is an air-powered tool, ensure the air hose is of adequate length and diameter to maintain proper air flow, rather than using an extension cord.

What might cause the impact wrench to overheat?

Overheating can be caused by prolonged use without breaks, insufficient lubrication, or blockages in the air supply. Allow the tool to cool and check for issues.