Sealey SA1003 Instruction Manual

Pages 3

Year 0

Language(s)

of 3

Sealey SA1003 Sander Specification

The Sealey SA1003 Sander is a robust and efficient pneumatic tool designed for professional use in automotive and woodworking applications. It operates on a compressed air system with a recommended pressure of 90 psi, ensuring optimal performance and longevity. The sander features a free-speed capability of 10,000 revolutions per minute, providing high efficiency in material removal and surface preparation tasks.

Constructed with a durable composite housing, the SA1003 is engineered to withstand rigorous use while minimizing user fatigue due to its lightweight design. The ergonomic grip enhances comfort and control, allowing for precise operation even during extended periods of use. This model includes a 150mm hook-and-loop backing pad, facilitating quick and easy abrasive disc changes.

The Sealey SA1003 incorporates a dual-action orbit of 5mm, ensuring a swirl-free finish ideal for both rough sanding and fine polishing. It is equipped with an adjustable speed control and exhaust, allowing users to tailor the tool's performance to specific job requirements and reducing the risk of contamination in the work environment.

The sander's air consumption is rated at 4cfm, making it compatible with most standard air compressors without excessive energy consumption. Additionally, the tool includes a built-in regulator to maintain consistent performance and a noise output level of approximately 85dB, aligning with industry standards for user safety and comfort.

Overall, the Sealey SA1003 Sander offers a reliable and versatile solution for professional sanding tasks, balancing power, and precision to deliver excellent results across a range of surfaces.

Sealey SA1003 Sander F.A.Q.

How do I change the sanding pad on the Sealey SA1003 Sander?

To change the sanding pad, first disconnect the sander from the air supply. Then, use the appropriate wrench to unscrew the retaining bolt on the sanding pad. Remove the old pad and replace it with a new one, ensuring it is securely tightened.

What is the recommended air pressure for operating the Sealey SA1003 Sander?

The recommended air pressure for the Sealey SA1003 Sander is between 90-100 PSI. Ensure your air compressor is set within this range for optimal performance.

How can I reduce vibrations while using the Sealey SA1003 Sander?

To reduce vibrations, ensure the sanding pad is properly balanced and securely attached. Additionally, check that the sander is lubricated according to the maintenance schedule and that all components are in good condition.

What type of lubricating oil should be used for the Sealey SA1003 Sander?

Use a high-quality air tool oil specifically designed for pneumatic tools. Apply a few drops into the air inlet before each use to maintain optimal performance and prolong the tool's lifespan.

How often should I perform maintenance on the Sealey SA1003 Sander?

Regular maintenance should be performed weekly, including cleaning the air filter, checking for air leaks, and lubricating the sander. For heavy usage, increase the frequency of maintenance checks.

What should I do if the Sealey SA1003 Sander doesn't start?

If the sander doesn't start, check the air supply connection and ensure the compressor is functioning correctly. Inspect the air hose for blockages or leaks and verify that the tool is properly lubricated.

Can I use the Sealey SA1003 Sander on metal surfaces?

Yes, the Sealey SA1003 Sander can be used on metal surfaces. Ensure you select the appropriate sanding disc for metalwork and adjust the sander’s speed to suit the material.

Why is the Sealey SA1003 Sander losing power during use?

Loss of power may be due to inadequate air pressure or a clogged air filter. Check the compressor settings, clean the air filter, and ensure the air hose is not kinked or damaged.

How do I store the Sealey SA1003 Sander when not in use?

Store the sander in a dry, clean environment away from moisture. Disconnect the air supply and remove any sanding discs before storage. Regularly inspect the tool for signs of wear or damage.

What should I do if the sanding pad gets stuck on the Sealey SA1003 Sander?

If the sanding pad is stuck, disconnect the sander from the air supply and use a wrench to carefully loosen the retaining bolt. Ensure not to force or over-tighten when reattaching a new pad.