Sealey RS105B.V1 Instruction Manual

To charge the Sealey RS105B.V1 Jump Starter, connect the supplied charger to the AC input port and plug it into a wall outlet. Ensure the unit is switched off during charging. The charging indicator will light up, and it typically takes about 6-8 hours for a full charge.
If the jump starter does not turn on, check if it is fully charged. If not, charge it using the supplied charger. Also, ensure that the power switch is in the "On" position. If the issue persists, inspect the unit for any visible damage or contact customer support for further assistance.
Yes, the Sealey RS105B.V1 Jump Starter can power other devices. It is equipped with a 12V DC output socket and USB ports, allowing you to charge or power devices like smartphones, tablets, and other small electronics.
To jump start a vehicle, first ensure the jump starter is fully charged. Connect the red clamp to the positive terminal of the vehicle's battery and the black clamp to the negative terminal. Turn on the jump starter and start the vehicle. Once the vehicle starts, disconnect the clamps in reverse order.
Regular maintenance includes keeping the unit charged, storing it in a cool, dry place, and cleaning the clamps and ports to prevent corrosion. Avoid exposing the unit to extreme temperatures and handle it carefully to prevent physical damage.
If the jump starter does not charge, check the charger and the AC outlet for proper functionality. Inspect the charging cable and connectors for any signs of damage. If the problem persists, contact customer support for further troubleshooting or repair options.
It is recommended to avoid using the jump starter in extreme weather conditions. Cold temperatures can affect battery efficiency, and high temperatures can cause overheating. Always operate within the temperature range specified in the manual.
To maintain optimal performance, charge the jump starter every three months when not in use. This ensures the internal battery remains healthy and ready for use when needed.
The Sealey RS105B.V1 Jump Starter is suitable for petrol engines up to 6.0 liters and diesel engines up to 3.0 liters. Attempting to start larger engines may not be successful and could damage the unit.
No, it is not advisable to leave the jump starter connected after the vehicle has started. Disconnect the clamps immediately after the engine starts to prevent damage to the jump starter and the vehicle's electrical system.