Sealey LEDWC03 Instruction Manual
![Sealey LEDWC03 Inspection Lamp manual cover](/images/PYbMIKlhlJjCcSMVOrZeqAtA/thumbs/thumb175x175.webp)
To charge the Sealey LEDWC03 Inspection Lamp, connect the included USB cable to the charging port on the lamp and plug the other end into a USB power source. The charging indicator will light up to show that the lamp is charging.
If the lamp does not turn on, ensure it is fully charged. If it still doesn't work, check the power button for any obstructions or damage. If the issue persists, contact Sealey customer support for assistance.
Yes, the Sealey LEDWC03 Inspection Lamp is suitable for outdoor use, but it should not be exposed to water or extreme weather conditions. It is recommended to use it in dry environments.
The battery in the Sealey LEDWC03 is not user-replaceable. If the battery no longer holds a charge, contact Sealey customer service for battery replacement options.
It is generally safe to leave the lamp charging overnight due to its built-in overcharge protection. However, it is recommended to unplug the lamp once it is fully charged to preserve battery life.
The charging indicator on the Sealey LEDWC03 Inspection Lamp will turn green when the battery is fully charged.
The battery life of the Sealey LEDWC03 Inspection Lamp is approximately 3-4 hours on a full charge, depending on usage conditions.
To clean the lamp, use a soft, damp cloth to wipe down the surfaces. Avoid using harsh chemicals or submerging the lamp in water.
Yes, the Sealey LEDWC03 Inspection Lamp has a magnetic base that allows it to be easily mounted on metal surfaces for hands-free operation.
If the light flickers or dims, ensure the lamp is fully charged. If the problem persists, it may indicate an internal fault, and you should contact Sealey customer support for further assistance.