Sealey ADT7.V2 Instruction Manual

To install the Sealey ADT7.V2 Gearbox Support, ensure the vehicle is securely lifted. Position the support under the gearbox, adjust the height using the hydraulic lift mechanism, and secure with the safety chains provided. Ensure the gearbox is stable before proceeding with any maintenance.
The Sealey ADT7.V2 Gearbox Support has a maximum weight capacity of 500 kg. Always ensure that the load does not exceed this limit to prevent damage or injury.
If the hydraulic lift mechanism is not functioning, check for hydraulic fluid leaks, ensure the release valve is tightly closed, and verify the fluid levels. If issues persist, consult the user manual or contact technical support.
The Sealey ADT7.V2 is specifically designed for gearbox support. While it can support similar weights, using it for engine support is not recommended unless the engine's weight and dimensions fall within the support's specifications.
Regularly inspect the support for signs of wear or damage, check hydraulic fluid levels, and lubricate moving parts. Ensure all bolts and nuts are tightened and the safety chains are in good condition.
To safely lower the gearbox, slowly open the hydraulic release valve, allowing the support to gently lower the load. Ensure the area is clear of obstacles and personnel to prevent accidents.
While the Sealey ADT7.V2 is equipped with wheels for mobility, it is strongly advised to avoid moving the support with a load in place to prevent tipping or accidents.
If a hydraulic fluid leak is detected, stop using the support immediately. Inspect the source of the leak, replace any damaged seals or hoses, and refill hydraulic fluid as necessary. Consult a professional if needed.
Hydraulic fluid levels should be checked before each use to ensure optimal performance and prevent damage to the lift mechanism.
The Sealey ADT7.V2 is designed to support a wide range of car and light commercial vehicle gearboxes, provided they do not exceed the 500 kg weight limit. Always verify the compatibility based on specific dimensions and weight.