Scheppach ASP12-ES Black CH 5807705903 Operating Manual
![Scheppach ASP12-ES Black CH 5807705903 Vacuum Cleaner manual cover](/images/xVxoNdKiNIOJUDWtQQHJfnFy/thumbs/thumb175x175.webp)
To change the filter, first ensure the vacuum is unplugged. Open the filter compartment by releasing the latches and remove the old filter. Insert the new filter, making sure it is properly seated, and close the compartment securely.
If the vacuum loses suction, check for blockages in the hose and attachments, ensure the dust container is not full, and inspect the filter for clogs. Clean or replace the filter if necessary.
Yes, the Scheppach ASP12-ES is designed for both dry and wet vacuuming. Ensure the correct filter is installed for wet cleaning and empty the container after use to prevent mildew.
The filter should be replaced every 3-6 months, depending on usage frequency and the amount of debris collected. Check the filter regularly and replace it if it shows signs of wear or clogging.
If the vacuum cleaner does not turn on, check the power cord and plug for damage, ensure the outlet is working, and inspect the fuse or circuit breaker. If the issue persists, contact customer support.
To clean the dust container, detach it from the vacuum, empty the contents into a waste bin, and rinse it with warm water. Allow it to dry completely before reattaching it to the vacuum.
The Scheppach ASP12-ES is safe for use on most flooring types, including carpets, tiles, and hardwood. However, for delicate surfaces, test in an inconspicuous area first.
If the vacuum is noisy, check for blockages in the hose or attachments, ensure all parts are securely attached, and inspect the motor for debris. If the noise continues, consult a professional technician.
The Scheppach ASP12-ES vacuum cleaner features a dust container with a capacity of approximately 12 liters, which allows for extensive cleaning without frequent emptying.
Regularly check and replace filters, clean the dust container after each use, inspect hoses for blockages, and ensure all moving parts are free of debris. Store the vacuum in a dry place when not in use.