Sandstrom S90SPGB13 Installation Instructions and After Care Guide
![Sandstrom S90SPGB13 manual cover](/images/uwjnWItYemkGPsRCOImEUijT/thumbs/thumb175x175.webp)
To install the Sandstrom S90SPGB13 Splashback, ensure the wall surface is clean and dry. Use a suitable adhesive to attach the splashback to the wall, pressing firmly to remove any air bubbles.
Use a mild detergent with warm water and a soft cloth to clean the splashback. Avoid abrasive cleaners or scouring pads that might scratch the surface.
Yes, the splashback can be cut using a glass cutter or a suitable power tool. It is recommended to have a professional perform the cutting to ensure precision and safety.
If the splashback begins to peel, reapply a suitable adhesive to the affected area and press firmly. Ensure the wall surface is clean before reapplying.
Yes, the splashback is designed to be heat resistant and can be safely used behind most cooktops. However, maintain a safe distance from direct flame and high heat sources.
Regularly clean the splashback with a glass cleaner and a microfiber cloth to maintain its shine. Avoid using wax or polish, as they may leave residues.
Minor scratches can be minimized using a glass repair kit. For deep scratches, it may be necessary to replace the splashback.
It is not recommended to paint the splashback as it may affect its appearance and durability. Consider using decorative films if a change in color is desired.
For stubborn stains, use a mixture of baking soda and water to form a paste. Apply it to the stain, let it sit for a few minutes, then gently scrub with a soft cloth.
Ensure the installation area is well-ventilated and free from moisture. Avoid installing in areas with extreme temperature fluctuations to prevent damage.