nette RNDISB14E Instruction Manual
![Radionette RNDISB14E manual cover](/images/QUpcKMSgGCjbEUJoCleOPCXm/thumbs/thumb175x175.webp)
To connect your Radionette RNDISB14E to a Bluetooth device, turn on the Bluetooth function in your device settings, then press the Bluetooth button on the speaker until it enters pairing mode. Select "Radionette RNDISB14E" from the list of available devices on your device to connect.
Ensure the Radionette RNDISB14E is connected to a power source and the power cable is securely attached. Check the power outlet and try a different one if necessary. If the issue persists, contact customer support for further assistance.
To reset the Radionette RNDISB14E to factory settings, press and hold the reset button located at the back of the speaker for about 10 seconds until the unit restarts. This will erase all settings and stored data.
Visit the Radionette official website and navigate to the support section. Download the latest firmware update for the RNDISB14E. Follow the included instructions to install the update via USB or Bluetooth connectivity.
To clean your Radionette RNDISB14E, use a soft, dry cloth to wipe the exterior. Avoid using water or chemical cleaners. Regularly check for dust in the speaker grills and gently brush it away. Store the unit in a cool, dry place when not in use.
Ensure the volume is turned up on both the Radionette RNDISB14E and the connected device. Check if the speaker is muted or if the correct input source is selected. Verify that the Bluetooth or wired connection is properly established.
Yes, you can connect the Radionette RNDISB14E to a TV using an auxiliary cable or via Bluetooth if the TV supports it. Ensure the correct input source is selected on the speaker to hear the audio from the TV.
To improve Bluetooth connection stability, ensure there are no obstructions between the speaker and the device. Keep the devices within a reasonable range. Avoid environments with heavy wireless interference from other devices.
Store the Radionette RNDISB14E in a cool, dry place away from direct sunlight and moisture. Cover it with a dust cover or cloth to prevent dust accumulation. Disconnect any cables to avoid wear and tear.
To set up a radio station preset, tune to the desired station using the tuning controls. Press and hold the preset button until you hear a confirmation beep. The station will be saved to the next available preset slot.