Power Wheels Dino Racer Orange GWT15 Manual
![Power Wheels Mattel Dino Racer Orange GWT15 Toy manual cover](/images/qZZRtufZZRiBCBttWRYDlGkT/thumbs/thumb175x175.webp)
To assemble the Dino Racer, follow the instructions provided in the user manual. Ensure all parts are included and securely fasten all screws and components as directed.
The Dino Racer requires a 12-volt rechargeable battery. To install, open the battery compartment under the seat, connect the battery to the power connector, and secure it in place.
Check the battery charge level, ensure the battery is correctly connected, and inspect the fuse. If the issue persists, consult the troubleshooting section in the manual.
The maximum weight limit for the Dino Racer is 65 pounds (approximately 29.5 kg).
Regularly check for loose parts, clean the vehicle with a damp cloth, and store it in a dry place. Keep the battery charged and avoid exposure to extreme temperatures.
Inspect the wheels for obstructions or damage. Ensure the axles are properly lubricated and securely attached. Replace any worn-out parts if necessary.
The Dino Racer has preset speed settings. Refer to the manual for instructions on switching between forward and reverse speeds.
It is not recommended to use the Dino Racer in wet conditions as it may damage the electrical components and reduce traction.
Charge the battery after every use and avoid letting it completely discharge. For optimal performance, charge it at least once a month if not used regularly.
If the battery does not hold a charge, test it with a voltmeter. If it is faulty, replace it with a compatible 12-volt battery and properly dispose of the old one.