Opel Vivaro 2018 Owner’s Manual
![Opel Vivaro 2018 manual cover](/images/c3a5756057d1e7f4b774d244/thumbs/thumb175x175.webp)
To reset the service light on your Opel Vivaro 2018, turn the ignition on, press the accelerator and brake pedals simultaneously, and hold them for about 15 seconds until the service light begins to flash and then goes off.
For the Opel Vivaro 2018, it is recommended to use a 5W-30 fully synthetic oil that meets the ACEA C3 specification.
To improve fuel efficiency, ensure your tires are properly inflated, regularly service the vehicle, use recommended oil, and avoid excessive idling and rapid acceleration.
The recommended tire pressure for the Opel Vivaro 2018 is typically around 36 PSI for the front tires and 39 PSI for the rear tires. Always check your owner’s manual to confirm.
To change the headlight bulb, open the bonnet, locate the back of the headlight assembly, remove the protective cover, disconnect the wiring harness, and replace the old bulb with a new one. Ensure not to touch the glass part of the new bulb.
Common issues include battery drain, faulty alternator, and malfunctioning lights. Regular maintenance and checks can help prevent these problems.
The timing belt should be replaced every 100,000 kilometers or every 5 years, whichever comes first. Always refer to the service manual for specific intervals.
A squealing noise might indicate a worn-out serpentine belt or a problem with the belt tensioner. It is advisable to inspect these components and replace them if necessary.
To pair your smartphone, enable Bluetooth on your phone, navigate to the Bluetooth settings in the Vivaro’s infotainment system, search for new devices, and select your phone from the list. Enter the pairing code if prompted.
The Opel Vivaro 2018 has a towing capacity of approximately 2,000 kg, but this can vary based on the model and engine type. Always check the owner's manual for specific details.