Opel Combo 2017 Owner’s Manual
![Opel Combo 2017 manual cover](/images/3c7831d5f9184b888630ccca/thumbs/thumb175x175.webp)
To reset the service light, turn the ignition on without starting the engine. Press and hold the trip reset button until the service light begins to flash. Release the button and turn off the ignition. The service light should be reset when you restart the vehicle.
The recommended engine oil for the Opel Combo 2017 is 5W-30 fully synthetic oil that meets ACEA C3 specifications. Always refer to the owner’s manual for specific recommendations.
To improve fuel efficiency, ensure regular maintenance such as air filter and spark plug replacements, maintain proper tire pressure, and avoid excessive idling. Driving at steady speeds and reducing unnecessary weight in the vehicle can also help.
Common issues include electrical problems, which can be resolved by checking and replacing fuses or faulty wiring. Suspension noises may require checking shock absorbers and bushings. Regular servicing can prevent most issues.
Open the hood and locate the back of the headlight assembly. Remove the cover, disconnect the electrical connector, and unclip the bulb. Replace with a new bulb, ensuring not to touch the glass with bare hands, and reassemble.
The Opel Combo 2017 has a towing capacity of approximately 1,000 kg (2,204 lbs) depending on the engine and configuration. Always check the owner’s manual for your specific vehicle's towing capacity.
Most Opel Combo models do not have a transmission dipstick. Checking the level often requires a service professional. If accessible, the fluid level check is done via a fill plug on the transmission. Consult a professional for assistance.
A squealing noise typically indicates worn brake pads. Inspect the brake pads for wear and replace them if necessary. Also, check for debris between the pad and rotor that could cause noise.
The recommended tire pressure for the Opel Combo 2017 is typically around 35 PSI, but it's important to check the sticker on the driver’s door jamb or the owner’s manual for the exact pressure for your specific model.
To perform a factory reset, access the settings menu on the infotainment system, locate the 'Restore Factory Settings' option, and confirm your selection. This will reset the system to its original state.