MV Agusta TURISMO VELOCE R 2023 Owner's Manual
![MV Agusta TURISMO VELOCE R 2023 Motorcycle manual cover](/images/CIahJZaiZzLeaMpVbLKYmxdv/thumbs/thumb175x175.webp)
The recommended tire pressure for the MV Agusta TURISMO VELOCE R 2023 is 36 psi for the front tire and 42 psi for the rear tire. Always check the tire pressure when the tires are cold.
It is recommended to change the oil every 6,000 miles or 12 months, whichever comes first, to ensure optimal performance and longevity of the engine.
The recommended oil for the MV Agusta TURISMO VELOCE R 2023 is a fully synthetic 10W-50 motorcycle oil. Always check the owner's manual for specific oil recommendations.
The suspension can be adjusted using the electronic suspension settings available on the dashboard. Navigate through the menu to select the desired riding mode or manually adjust the preload, rebound, and compression settings according to your preference.
If the engine warning light comes on, first check for any obvious issues such as low oil level or overheating. If everything seems normal, it is advisable to take the motorcycle to an authorized dealer for a diagnostic check to identify any potential issues.
Clean the chain with a suitable chain cleaner and a soft brush. After cleaning, lubricate the chain with a high-quality motorcycle chain lubricant. Ensure the chain is lubricated every 500 miles or after riding in wet conditions.
Regularly check the battery terminals for corrosion and ensure they are tightly connected. Keep the battery charged, especially during long periods of inactivity, using a compatible motorcycle battery charger.
To reset the service light, turn on the ignition without starting the engine. Navigate through the dashboard menu to find the service reset option and follow the on-screen instructions. Consult the owner's manual for detailed steps.
Check the kill switch and ensure it is in the 'run' position. Verify that the battery is charged and the connections are secure. Inspect the fuel level and the fuel pump. If the problem persists, consult an authorized service center.
To adjust the handlebars, loosen the handlebar clamp bolts using a suitable wrench. Adjust the handlebars to the desired position and then retighten the clamp bolts to the specified torque as per the owner's manual.