MV Agusta Brutale 800 2012 Owner's Manual
![MV Agusta Brutale 800 2012 Motorcycle manual cover](/images/piiGmgKlXhrSYbyptBcOjGji/thumbs/thumb175x175.webp)
The recommended oil type for the MV Agusta Brutale 800 2012 is a fully synthetic 10W-40 motorcycle oil. Ensure it meets the specifications set by MV Agusta for optimal performance.
The chain should be lubricated every 500 kilometers (approximately 310 miles) or sooner if the motorcycle is used in wet or dusty conditions.
The recommended tire pressure for the MV Agusta Brutale 800 2012 is 2.5 bar (36 psi) for the front tire and 2.9 bar (42 psi) for the rear tire.
To adjust the suspension, refer to the owner’s manual for specific instructions on preload, rebound, and compression settings. Adjustments should be made based on rider weight and riding conditions.
If the motorcycle won't start, check the battery charge, ensure the kill switch is in the 'run' position, and verify there is sufficient fuel. If the problem persists, consult a professional mechanic.
To reset the service light, access the motorcycle's menu system via the instrument panel. Navigate to the service menu and follow the instructions to reset. Refer to the owner's manual for detailed steps.
The break-in period for the MV Agusta Brutale 800 2012 is typically the first 1,000 kilometers (620 miles). During this time, avoid full throttle starts and high RPMs to ensure proper engine seating.
To check the coolant level, ensure the motorcycle is on a level surface and the engine is cool. Locate the coolant reservoir and verify the level is between the minimum and maximum marks.
Use DOT 4 brake fluid for the MV Agusta Brutale 800 2012. Ensure the brake fluid is fresh and from a sealed container to maintain braking performance.
To improve fuel efficiency, maintain proper tire pressure, perform regular maintenance, avoid aggressive acceleration, and use high-quality fuel.