Mongoose Air Tire Owner's Manual
![Mongoose Air Tire Scooter manual cover](/images/BwjtEknLsKHaDdPymiMWvuQb/thumbs/thumb175x175.webp)
Use a standard bicycle pump to inflate the tires. Check the sidewall of the tire for the recommended PSI and ensure the valve is securely closed after inflation.
First, clean the brake pads and rims with rubbing alcohol. If the squeaking persists, check for uneven wear on the brake pads and consider adjusting or replacing them.
Loosen the clamp lever or bolts on the handlebar stem, adjust the height to a comfortable level, and then securely tighten the clamp to ensure stability.
Regularly check tire pressure, clean and lubricate the chain, inspect brakes for wear, and ensure all bolts and nuts are tight.
Check the tire pressure and inflate if necessary, inspect the wheels for obstructions, and ensure the brakes are not rubbing against the rims.
Store the scooter in a dry, indoor location. Clean it thoroughly and lubricate moving parts to prevent rust. Keep the tires slightly inflated to avoid flat spots.
Remove the wheel, take out the inner tube, and patch the hole or replace the tube if necessary. Reassemble and inflate to the recommended PSI.
Check if the wheels are properly aligned and that the axle nuts are tight. Inspect the frame and handlebars for any looseness or damage.
Use a damp cloth to wipe down the frame and components. Avoid using high-pressure water as it may damage bearings. Dry thoroughly to prevent rust.
Clean any dirt or debris from the folding mechanism and apply a light lubricant to the moving parts. Operate the mechanism several times to ensure smoothness.