Milwaukee M18 Rocket 2130-20 Operator's Manual

To set up the Milwaukee M18 Rocket 2130-20 Light, extend the tripod legs by releasing the leg latches and pulling the legs apart. Then, adjust the height by loosening the locking collars on the pole and sliding it to your desired height. Finally, secure the light head at the top by tightening the adjustment knobs.
To maintain the battery life of your M18 Rocket Light, ensure that the battery is fully charged before use, avoid deep discharges, and store the battery in a cool, dry place when not in use. It's also beneficial to charge the battery every few months if it’s not used frequently.
If your Milwaukee M18 Rocket Light is not turning on, check to ensure that the battery is properly inserted and fully charged. Inspect the battery contacts for any debris or corrosion and clean them if necessary. If the issue persists, try using a different battery to determine if the battery is faulty.
If you experience uneven lighting output, ensure that the light head is clean and free from obstructions. Check the light bulbs for any signs of damage or burn-out, and replace them if needed. Verify that the light head is securely mounted and properly aligned.
The M18 Rocket Light is designed to be durable, but it's best to avoid using it in heavy rain or wet conditions to prevent water damage. If using in damp environments, ensure that the battery compartment is sealed and avoid direct exposure to water.
It's recommended to clean your Milwaukee M18 Rocket Light after each use, especially if used in dusty or dirty environments. Use a soft, damp cloth to wipe down the exterior and ensure that vents and the light head are free from dust and debris.
Yes, the Milwaukee M18 Rocket Light is compatible with all M18 batteries. However, using higher capacity batteries will provide longer run times. Ensure the battery is properly connected and charged for optimal performance.
If the tripod legs are not staying in place, check that the leg latches are fully engaged and free of debris. Tighten any loose screws or bolts on the tripod mechanism. If the issue persists, contact Milwaukee customer support for further assistance.
To safely transport the Milwaukee M18 Rocket Light, retract the tripod legs and lower the pole to its minimum height. Secure the light head and ensure all locks are tightened. Carry the light using the integrated handle and avoid dropping or banging it against hard surfaces.
No, the M18 Rocket Light is designed to operate with battery power only and does not support operation while charging. Ensure the battery is fully charged before use for uninterrupted lighting.