Milwaukee M18 2146-20 Operator's Manual
![Milwaukee M18 2146-20 Light manual cover](/images/OiwURKcflwRUxchoPmtkXtys/thumbs/thumb175x175.webp)
To charge the battery, remove it from the light and insert it into a compatible M18 charger. Ensure the charger is connected to a power source. The charging process will begin automatically.
Check to ensure the battery is fully charged and properly inserted. If the battery is charged and the light still does not turn on, inspect the terminals for dirt or damage. Clean if necessary and try again.
The light has multiple brightness settings. Use the power button to cycle through the available settings until you reach the desired brightness level.
Use a soft, damp cloth to wipe down the exterior of the light. Avoid using harsh chemicals or solvents, as these can damage the housing. Ensure the light is turned off and the battery is removed before cleaning.
The light is designed to be water-resistant, but it is not waterproof. It can handle light rain but should not be submerged in water.
To extend battery life, avoid running the light at maximum brightness unless necessary, and store the battery in a cool, dry place when not in use. Regularly charge the battery before it is fully depleted.
Yes, the light is compatible with any Milwaukee M18 battery. However, the runtime may vary depending on the battery capacity used.
The runtime depends on the battery capacity and the brightness setting. With a fully charged 5.0Ah battery, it can provide up to 10 hours on low setting.
The LED bulbs are integrated and designed for a long lifespan, so they do not require regular replacement. If an LED fails, contact Milwaukee service for assistance.
Regularly inspect the light for any damage, clean it as needed, and ensure the battery terminals are clean. Store it in a dry place and avoid exposure to extreme temperatures.