Metabo TS 254 Operating Instructions

Pages 152

Year 2018

Language(s)

of 152

Metabo TS 254 Saw Specification

The Metabo TS 254 is a high-performance table saw designed for precision and efficiency in woodworking tasks. It features a robust 2,000-watt motor capable of delivering a no-load speed of 4,200 revolutions per minute, ensuring powerful cutting performance across a variety of materials. The saw is equipped with a large, flat table surface made of die-cast aluminum, providing stability and a spacious work area. It offers a cutting height of up to 87 millimeters at 90 degrees and 54 millimeters at 45 degrees, catering to diverse project requirements.

The TS 254 includes a precise angle adjustment system, allowing for exact bevel cuts with a maximum tilt of 47 degrees to the left. Its integrated overload protection feature safeguards the motor from overheating, ensuring longevity and reliability. The saw's compact design incorporates a trolley function with wheels and a foldable stand, enhancing portability and ease of transport for on-site work.

Safety is a key aspect, with features like a riving knife and a tool-less blade guard system that promote secure operation. The soft start function minimizes the risk of tripping circuit breakers while the dust extraction port facilitates a cleaner working environment by efficiently removing sawdust. The Metabo TS 254 also includes a push stick and a parallel guide for enhanced cutting precision and operator safety. Overall, this saw combines power, precision, and portability, making it an ideal choice for professionals and serious woodworking enthusiasts.

Metabo TS 254 Saw F.A.Q.

How do I adjust the cutting angle on the Metabo TS 254?

To adjust the cutting angle on the Metabo TS 254, loosen the bevel lock lever located on the side of the saw. Tilt the saw blade to the desired angle using the bevel adjustment scale, then tighten the lever to secure the angle.

What is the best way to clean the Metabo TS 254 after use?

After use, unplug the saw and use a brush or compressed air to remove sawdust from the blade, table, and motor housing. Wipe down the surfaces with a damp cloth to remove any remaining debris. Avoid using water directly on the saw to prevent damage.

How can I change the blade on the Metabo TS 254?

To change the blade, unplug the saw and raise the blade to maximum height. Remove the blade guard and use the wrench provided to loosen the arbor nut. Replace the blade, ensuring the teeth face the correct direction, then tighten the arbor nut and replace the guard.

Why is my Metabo TS 254 making a loud noise during operation?

A loud noise may indicate a loose blade or motor issue. Check if the blade is securely fastened and inspect it for damage. If the noise persists, inspect the motor for any signs of wear or contact a professional for further diagnosis.

How do I align the rip fence on the Metabo TS 254?

To align the rip fence, ensure it is parallel to the blade by measuring the distance from the fence to the blade at both the front and back. Adjust the fence as needed and lock it in place using the fence lever.

What maintenance is required for the Metabo TS 254?

Regular maintenance includes cleaning after each use, checking the blade for sharpness, and inspecting the power cord for damage. Lubricate the moving parts and check the alignment of the blade and fence periodically.

How do I troubleshoot power loss during operation of the Metabo TS 254?

Check the power supply and ensure that the cord is properly connected. Inspect the circuit breaker for tripping and reset if necessary. If power loss continues, check for overheating and allow the motor to cool down before resuming use.

Can I use a dado blade with the Metabo TS 254?

The Metabo TS 254 is not designed to accommodate dado blades. Using non-compatible blades may affect the safety and performance of the saw. Always refer to the user manual for compatible accessories.

How can I ensure precise cuts on the Metabo TS 254?

For precise cuts, ensure the blade is sharp and properly aligned. Use the rip fence and miter gauge to guide the material, and maintain a steady, consistent feed rate through the blade.

What should I do if the blade guard on the Metabo TS 254 is not functioning properly?

If the blade guard is not functioning, stop using the saw and inspect the guard mechanism for any obstructions or damage. Clean and lubricate the pivot points, and ensure it moves freely. Replace the guard if necessary to ensure safe operation.