Metabo TS 216 Operating Instructions

Pages 148

Year 2016

Language(s)

of 148

Metabo TS 216 Saw Specification

The Metabo TS 216 Saw is a compact yet powerful table saw designed for precision and efficiency in woodworking tasks. It features a robust 1500-watt motor that delivers consistent performance for a variety of cutting applications. The saw's blade measures 216 mm in diameter, providing a maximum cutting depth of 63 mm at 90 degrees and 43 mm at 45 degrees, making it versatile for straight and angled cuts. The saw includes a tilting range of -1.5 to 46.5 degrees, allowing for beveled cuts, and offers an impressive maximum cutting width of 425 mm with the table extension.

The TS 216 is equipped with a sturdy die-cast aluminum table, enhancing stability and durability while maintaining a lightweight design for easy portability. The integrated stand, designed for quick setup and breakdown, aids in convenient transportation and space-saving storage. Its intelligent design includes a dust extraction port, ensuring a cleaner working environment by efficiently removing sawdust and debris.

Safety features are paramount, with a riving knife and a protective blade guard included to prevent kickback and accidental contact with the blade. Additionally, the saw boasts soft-start technology to reduce the initial load and minimize the risk of tripping circuit breakers. The precision rip fence and miter gauge facilitate accurate and repeatable cuts, supporting both professional and DIY applications.

The Metabo TS 216's ergonomic design emphasizes user comfort, with well-placed controls and easy adjustments to enhance operational efficiency. Its combination of power, portability, and precision makes it an ideal choice for craftsmen seeking reliability and performance in a compact form factor.

Metabo TS 216 Saw F.A.Q.

How do I align the blade on the Metabo TS 216?

To align the blade on the Metabo TS 216, first unplug the saw. Loosen the bevel lock and adjust the blade to a 90-degree angle using a square placed against the blade and table. Tighten the bevel lock once aligned.

What should I do if the motor of my Metabo TS 216 overheats?

If the motor overheats, turn off the saw and unplug it immediately. Allow it to cool down for at least 30 minutes. Check for any blockages in the ventilation slots and clean them if necessary. Avoid overloading the saw to prevent overheating.

How can I change the blade on the Metabo TS 216?

Unplug the saw and raise the blade to the highest position. Use the blade wrench to loosen the arbor nut, then remove the old blade. Install the new blade, ensuring the teeth face the correct direction, and tighten the arbor nut securely.

Why is my Metabo TS 216 making unusual noises?

Unusual noises may result from a loose blade, damaged bearings, or debris caught in the blade area. Check that the blade is securely fastened and inspect for debris. If the noise persists, consult a professional for bearing inspection.

What regular maintenance should be performed on the Metabo TS 216?

Regularly clean the sawdust from the table and motor housing. Check and tighten any loose screws or bolts. Lubricate moving parts as per the manufacturer's instructions. Inspect the power cord for any damage.

How do I ensure accurate cuts on the Metabo TS 216?

Ensure the fence is parallel to the blade by measuring the distance from the fence to the blade at both the front and back. Adjust as needed. Use a sharp blade and maintain a steady feed rate to achieve precise cuts.

The Metabo TS 216 won't start, what could be the issue?

Check that the saw is plugged into a working power outlet. Inspect the power cord for damage. Ensure the power switch is functioning and not obstructed. If it still won't start, the internal fuse may need replacement.

How do I adjust the bevel angle on the Metabo TS 216?

Loosen the bevel lock lever located at the front of the saw. Tilt the blade to the desired angle using the bevel scale for reference. Once set, tighten the bevel lock lever to secure the angle.

What safety precautions should I take when using the Metabo TS 216?

Always wear safety glasses and hearing protection. Ensure the saw is on a stable surface and the work area is free of clutter. Use push sticks for ripping narrow stock and keep hands clear of the blade.

How do I clean the Metabo TS 216 after use?

Unplug the saw and use a brush or vacuum to remove sawdust and debris from the table, blade area, and motor housing. Wipe down the surfaces with a damp cloth. Avoid using water directly on the saw.