Mercedes-Benz GLE Coupe 2021 Owner's Manual

To reset the service light, turn on the ignition without starting the engine. Use the steering wheel controls to navigate to the "Service" menu, then select "Full Service" and confirm the reset operation.
The recommended tire pressure for the GLE Coupe is typically 36 PSI for the front tires and 39 PSI for the rear tires. Always check the sticker inside the driver's door for the most accurate information.
Enable Bluetooth on your smartphone. On the vehicle's infotainment system, select 'Phone,' then 'Connect Device,' and follow the prompts to pair your phone with the car.
Mercedes-Benz recommends using synthetic motor oil meeting MB-Approval 229.51 or 229.52 specifications, typically 0W-40 or 5W-40 viscosity grades.
To update the navigation system, visit the Mercedes-Benz website to download the latest maps onto a USB drive, then insert the USB into the car's port and follow the on-screen instructions to install the update.
To activate parking assist, press the parking assist button located on the center console. The system will guide you with visual and audio cues as you maneuver into a parking spot.
If the key fob battery is dead, use the mechanical key inside the fob to unlock the door. To start the car, hold the key fob near the start button while pressing it.
To replace the cabin air filter, locate the filter housing under the dashboard on the passenger side, remove the cover, take out the old filter, and insert a new one. Ensure it is oriented correctly according to the airflow direction.
The 2021 Mercedes-Benz GLE Coupe has a towing capacity of up to 7,700 pounds when properly equipped with the optional trailer hitch.
To perform a soft reset of the MBUX system, press and hold the power button on the infotainment system for about 10 seconds until the screen turns off and the system restarts.