Mercedes-Benz GLC Coupe 2020 Owner's Manual
![Mercedes-Benz GLC Coupe 2020 manual cover](/images/627a3b077c71e233241c373f/thumbs/thumb175x175.webp)
To reset the tire pressure monitoring system, navigate to the "Service" menu on the instrument cluster using the steering wheel controls. Select "Tire Pressure" and follow the prompts to confirm the reset. Ensure all tires are inflated to the correct pressure before performing the reset.
Mercedes-Benz recommends using a fully synthetic engine oil with a viscosity of 0W-40 or 5W-40 that meets the MB 229.5 specification. Always refer to your owner's manual for the most accurate information.
To pair your smartphone, turn on Bluetooth on your device and ensure it is visible. On the vehicle's infotainment screen, go to "Telephone" > "Connect Device" > "Search for Phones." Select your phone from the list and confirm the pairing code on both the infotainment system and your smartphone.
Regular maintenance for the GLC Coupe 2020 should be performed every 10,000 miles or 12 months, whichever comes first. This includes oil changes, tire rotations, brake inspections, and fluid level checks. Consult your owner's manual for a detailed maintenance schedule.
To replace a headlight bulb, open the hood and locate the back of the headlight assembly. Remove the dust cover, disconnect the electrical connector, and release the bulb retaining clip. Replace the bulb with a new one and reassemble in reverse order. Always handle bulbs with clean gloves to avoid damage.
A squealing noise may indicate worn brake pads or the presence of debris between the brake pad and rotor. It's advisable to have the brakes inspected by a professional to determine the cause and prevent further damage.
To update the navigation system, visit the Mercedes-Benz website to check for available updates. You can download the update onto a USB drive and insert it into the vehicle’s USB port. Follow the on-screen instructions to complete the update.
If the check engine light comes on, it's important to have the vehicle diagnosed as soon as possible. While it may be a minor issue, it can also indicate a more serious problem that requires professional attention. Use an OBD-II scanner to read any error codes for a preliminary diagnosis.
The Eco Start/Stop function is typically enabled by default. To ensure it is active, press the Eco button located on the center console. The system automatically turns the engine off when the vehicle is stationary, and restarts it when you lift your foot off the brake pedal.
The Mercedes-Benz GLC Coupe 2020 has a towing capacity of up to 3,500 pounds when properly equipped with the optional trailer hitch. Always ensure the load is within the vehicle's capacity and properly secured.