McLaren Super Series MY21 765LT Owner's Manual
![McLaren Super Series MY21 765LT manual cover](/images/TTXCHlFlioBJLBYDsqqfSrUQ/thumbs/thumb175x175.webp)
To engage launch control, ensure the vehicle is in Track mode, press the "Active" button, and hold down the brake pedal with your left foot. Simultaneously, fully depress the accelerator with your right foot. Release the brake to launch.
The recommended tire pressure for the McLaren 765LT can vary based on load and driving conditions, but typically it is 30 psi for the front tires and 33 psi for the rear tires. Always refer to the owner's manual for specific guidance.
It is recommended to change the oil every 10,000 miles or annually, whichever comes first. However, if the vehicle is driven in extreme conditions, more frequent changes may be necessary.
Common issues include monitoring for tire wear, brake pad replacement, and ensuring the electronic systems are functioning properly. Regular diagnostics checks are advised.
To reset the service light, turn the ignition to the on position without starting the engine. Use the steering wheel controls to navigate to the service menu, and select the reset option. Consult the owner's manual for detailed instructions.
Ensure the vehicle is cleaned, fluids are topped up, and the battery is disconnected or connected to a trickle charger. Store the car in a cool, dry place and cover it with a breathable car cover.
To optimize aerodynamics, ensure that all body panels are intact and fastened. Consider adding McLaren-approved aerodynamic kits and maintaining the factory-set ride height.
Before a track day, check tire pressures, fluid levels, and brake condition. After the event, inspect tires for wear, check brake pads and rotors, and ensure all mechanical components are intact.
To update the navigation system, download the latest maps from the McLaren website onto a USB drive, insert it into the car's USB port, and follow the on-screen instructions.
Use a soft brush to gently remove dirt and dust. For stains, a mild fabric cleaner applied with a microfiber cloth works well. Avoid excessive moisture and harsh chemicals.