McLaren Super Series MY20 720S Coupe Owner's Manual
![McLaren Super Series MY20 720S Coupe manual cover](/images/dKBLzJgrtoOzBBsemSIxOcJW/thumbs/thumb175x175.webp)
The recommended tire pressure for the McLaren 720S Coupe is typically 29 psi for the front tires and 32 psi for the rear tires. Always refer to the owner's manual for the most accurate information.
To perform an oil change on the McLaren 720S Coupe, ensure the engine is cool, lift the vehicle securely, remove the underbody panel, drain the old oil, replace the oil filter, and fill with new oil as per manufacturer specifications. Always consult the service manual for detailed instructions.
To store the McLaren 720S Coupe during winter, clean the vehicle thoroughly, inflate the tires to the recommended pressure, disconnect the battery, and use a car cover. It's also advisable to store the car in a climate-controlled environment.
To reset the service light on the McLaren 720S Coupe, you typically need to use the onboard diagnostics system. Follow the prompts on the instrument cluster or consult the owner's manual for specific instructions.
The McLaren 720S Coupe requires high-octane unleaded gasoline with an octane rating of at least 98 RON for optimal performance.
To clean carbon ceramic brakes, use a pH-neutral wheel cleaner, apply it generously, and rinse with plenty of water. Avoid using abrasive pads or harsh chemicals.
If the engine of your McLaren 720S Coupe overheats, pull over safely, turn off the engine, and allow it to cool. Check coolant levels once cooled and seek professional assistance if necessary.
To improve fuel efficiency, avoid aggressive driving, ensure regular maintenance, keep tires properly inflated, and reduce extra weight. Consider using eco-friendly driving modes if available.
Follow the McLaren maintenance schedule as outlined in the owner's manual, which includes regular oil changes, brake inspections, and system checks at specified intervals.
To change the wiper blades, lift the wiper arm away from the windshield, press the release tab on the old blade, slide it off, and attach the new blade until it clicks into place.