McLaren MY23 720S Owner's Manual
![McLaren MY23 720S manual cover](/images/rZQDxpsqTQjlCNSHZwuWivnE/thumbs/thumb175x175.webp)
To perform a basic oil check on the McLaren MY23 720S, ensure the car is on a level surface and the engine is cool. Open the rear bonnet, locate the dipstick, remove it, and wipe it clean. Reinsert the dipstick fully, remove it again, and check the oil level. It should be between the 'Min' and 'Max' marks.
The recommended tire pressure for the McLaren MY23 720S is 29 psi for the front tires and 33 psi for the rear tires. It's crucial to check tire pressure regularly to ensure optimal performance and handling.
If the infotainment system is non-responsive, try restarting the system by turning the car off and on. If the issue persists, check for any available software updates or consult the owner's manual for a reset procedure. If unresolved, contact a McLaren service center.
If the engine warning light illuminates, it's important to address it promptly. Safely stop the vehicle and check for obvious issues, such as a loose fuel cap. If no obvious issue is found, schedule a diagnostic check with a certified McLaren technician.
To maintain carbon ceramic brakes, avoid aggressive driving until they are warmed up. Regularly inspect for wear and listen for unusual noises. Schedule regular maintenance with a McLaren service center to ensure they remain in optimal condition.
For long-term storage, clean the car thoroughly, fill up the fuel tank, and add a fuel stabilizer. Disconnect the battery or use a trickle charger. Cover the vehicle with a breathable car cover and store it in a dry, temperature-controlled environment.
To reset the TPMS on the McLaren MY23 720S, inflate the tires to the recommended pressure. Drive the car for a few miles at a consistent speed to allow the system to recalibrate. If the light remains on, consult the owner's manual or contact a McLaren technician.
Air filters in the McLaren 720S should be inspected at every service interval and replaced approximately every 15,000 miles or as needed based on driving conditions. Regular replacement ensures optimal engine performance and efficiency.
To check the brake fluid, locate the brake fluid reservoir under the bonnet. The fluid level should be between the 'Min' and 'Max' marks. For replacement, it's recommended to have a certified McLaren technician perform the task to ensure proper bleeding and system integrity.
To update the navigation system, check for available updates on the McLaren website or your owner's portal. Follow the instructions to download the update to a USB drive, then connect the drive to the car's USB port. Follow the on-screen instructions to complete the update.