Mazda Tribute 2008 Maintenance Schedule Manual
![Mazda Tribute 2008 manual cover](/images/f21ac2caded3e0968b11038b/thumbs/thumb175x175.webp)
To reset the tire pressure monitoring system, ensure all tires are properly inflated, then drive the vehicle above 20 mph for at least 10 minutes. This will allow the system to re-calibrate.
The recommended engine oil for a 2008 Mazda Tribute is SAE 5W-20. Always check the owner's manual for the most accurate information.
First, check the refrigerant levels and ensure the compressor is engaging. If these are fine, inspect the cabin air filter for blockages and ensure the AC system is free of leaks.
Regular maintenance includes oil changes every 5,000 miles, air filter replacement every 15,000 miles, and checking the brakes and suspension every 20,000 miles. Consult the owner's manual for a detailed schedule.
Open the hood and locate the back of the headlight assembly. Remove the connector and dust cover, then twist and remove the old bulb. Insert the new bulb, replace the dust cover and connector. Test the lights before closing the hood.
A grinding noise usually indicates worn brake pads that need replacement. Inspect the brake pads and rotors for wear and tear, and replace them if necessary.
Ensure the vehicle is on a level surface and the engine is warm. With the engine idling, pull out the transmission dipstick, wipe it clean, then reinsert it and pull it out again to check the fluid level.
First, ensure the gas cap is properly tightened. If the light remains on, use an OBD-II scanner to read the trouble codes, which can help diagnose the issue.
Insert the key into the ignition and turn it to the "On" position. Within three seconds, turn it back to "Off" and remove the key. Repeat this process three times, then press a button on the new fob. The doors should lock and unlock to confirm programming.
Common causes include a low coolant level, a faulty thermostat, a malfunctioning radiator fan, or a clogged radiator. Inspect these components and address any issues found.