Mazda Speed 3 2007 Maintenance Schedule Manual
![Mazda Speed 3 2007 manual cover](/images/9b350869c07bbe2e55eec828/thumbs/thumb175x175.webp)
For optimal performance, use synthetic 5W-30 motor oil in the 2007 Mazda Speed 3. Always check the owner’s manual for specific recommendations.
To reset the TPMS, ensure all tires are properly inflated, then drive the vehicle at speeds above 20 mph for at least 10 minutes. The system should recalibrate automatically.
The recommended tire pressure for the 2007 Mazda Speed 3 is 32 psi for both the front and rear tires. Always verify this information with the label inside the driver’s door frame.
To improve fuel efficiency, maintain regular engine tune-ups, ensure tires are properly inflated, avoid excessive idling, and drive at moderate speeds.
A knocking noise could be due to low-quality fuel, worn engine components, or issues with the timing chain. It's advisable to have a professional mechanic diagnose the problem.
If the check engine light is on, first check the gas cap to ensure it is tight. If the light remains, it's recommended to use an OBD-II scanner to read the error codes or consult with a mechanic.
It is generally recommended to change the spark plugs every 30,000 miles. However, refer to the owner’s manual for the manufacturer’s specific maintenance schedule.
Common transmission issues include rough shifting, slipping gears, and delayed engagement. Regular transmission fluid checks and maintenance can help prevent these problems.
To replace the cabin air filter, open the glove box, remove the dampener arm, and press in on the sides to release it. Access the filter housing and replace the old filter with a new one.
The 2007 Mazda Speed 3 uses FL22 coolant, which is a long-life ethylene glycol-based coolant. Always confirm with the owner’s manual for compatibility.