Mazda MX-5 Miata PRHT 2014 Maintenance Schedule Manual
![Mazda MX-5 Miata PRHT 2014 manual cover](/images/9f726a0870e985074cd84d1b/thumbs/thumb175x175.webp)
To reset the TPMS, ensure all tires are inflated to the recommended pressure. Start the car and press the TPMS reset button located under the steering wheel until the TPMS indicator blinks twice. Drive the car for a few miles to allow the system to recalibrate.
The recommended oil for the 2014 Mazda MX-5 Miata PRHT is SAE 5W-20. Using the correct viscosity and quality of oil is critical for optimal engine performance.
If the power retractable hardtop is not functioning, check the fuse for the roof motor, ensure the battery is fully charged, and verify that all latches are in the correct position. If the issue persists, consult a professional technician.
Regular maintenance for the 2014 Mazda MX-5 Miata PRHT includes oil changes every 7,500 miles, tire rotations every 7,500 miles, and brake inspections every 15,000 miles. Consult your owner's manual for a detailed schedule.
To improve fuel efficiency, ensure regular maintenance is performed, keep tires properly inflated, reduce excess weight, and drive smoothly by avoiding rapid acceleration and heavy braking.
If the check engine light comes on, check for any loose gas caps as a first step. If the light remains on, use an OBD-II scanner to read the error codes or take your vehicle to a mechanic for diagnosis.
To replace a headlight bulb, open the hood and locate the back of the headlight assembly. Twist the bulb socket to remove it, replace the old bulb with a new one, and reinsert the socket into the headlight assembly. Ensure the bulb is properly seated.
To store your Miata for winter, clean the vehicle thoroughly, fill the gas tank, add a fuel stabilizer, inflate tires to the correct pressure, and disconnect the battery. Cover the car with a breathable car cover.
To pair your phone, enable Bluetooth on your phone and navigate to the Bluetooth settings in the Miata's infotainment system. Select 'Add New Device' and follow the prompts to complete the pairing process.
To change the spark plugs, remove the engine cover to access the spark plug wires. Disconnect the wires, remove the old spark plugs with a socket wrench, and install new spark plugs. Reconnect the wires and replace the engine cover.