Mazda MX-5 Miata 2010 Maintenance Schedule Manual

To reset the tire pressure monitoring system, ensure all tires are properly inflated. Then, drive the car at speeds above 15 mph for at least 10 minutes. The system should automatically reset.
The recommended engine oil for the 2010 Mazda MX-5 Miata is SAE 5W-20. It's important to use oil that meets the API standard SM or higher.
First, check the latch handle to ensure it is fully released. Inspect the hydraulic fluid level if applicable, and check for any obstructions or electrical issues such as blown fuses.
Regular maintenance includes oil changes every 7,500 miles, tire rotations every 7,500 miles, and brake inspections every 15,000 miles. A detailed schedule can be found in the owner's manual.
Locate the air filter housing in the engine compartment. Unclip the cover, remove the old filter, and insert the new one. Ensure the filter is seated properly before reattaching the cover.
If the check engine light is steady, check for any loose gas caps. If it continues to be illuminated, consult a professional for diagnostics. If it is flashing, avoid driving and seek immediate assistance.
Activate the Bluetooth on your phone, then navigate to the car's audio system settings. Select 'Bluetooth' and then 'Add New Device'. Follow the prompts to complete the pairing process.
The recommended tire pressure for the 2010 Mazda MX-5 Miata is typically 29 psi for both front and rear tires. Always verify with the placard located on the driver's side door jamb.
Use a small screwdriver to gently pry open the key fob case. Remove the old battery and replace it with a new CR1620 battery, ensuring the positive side is facing up. Snap the case back together.
Check the headlight lenses for cloudiness and clean them if necessary. Also, inspect the bulbs and replace them if they are old or burnt out. Ensure the alternator is functioning correctly to maintain proper electrical output.