Mazda CX-5 2018 Navigation Owner's Manual
![Mazda CX-5 2018 manual cover](/images/40d6a7c46eb621b8f778a40d/thumbs/thumb175x175.webp)
To reset the tire pressure monitoring system (TPMS) in your 2018 Mazda CX-5, ensure all tires are properly inflated. Turn the ignition to 'on' without starting the engine. Locate the TPMS reset button under the dashboard, press and hold it until the TPMS indicator blinks twice, then release. Drive the vehicle for about 20 minutes to complete the reset process.
For optimal performance, use SAE 0W-20 oil with a certified API SN or ILSAC GF-5 rating for your 2018 Mazda CX-5. This ensures proper lubrication, fuel efficiency, and engine protection.
To pair your smartphone, enable Bluetooth on your device. In the Mazda Connect system, navigate to 'Settings', then 'Devices', and select 'Bluetooth'. Choose 'Add New Device' and select your phone from the list. Confirm the pairing code on both devices to complete the connection.
The check engine light in your 2018 Mazda CX-5 can indicate several issues, such as a loose gas cap, faulty oxygen sensor, or catalytic converter problems. It's recommended to use an OBD-II scanner to retrieve the trouble codes or visit a certified mechanic for diagnosis and repair.
The air filter in your 2018 Mazda CX-5 should be inspected every 15,000 miles and replaced every 30,000 miles or sooner if you drive in dusty or polluted conditions. Regular replacement ensures optimal engine performance and fuel efficiency.
The 2018 Mazda CX-5 has a maximum towing capacity of 2,000 pounds. It's important to ensure your trailer and load do not exceed this limit and that your CX-5 is equipped with the necessary towing accessories.
To change the key fob battery, locate the small release button on the key fob, pull out the metal key, and use a flathead screwdriver to gently pry open the fob. Replace the old battery with a new CR2025 battery, ensuring the positive side faces up. Snap the fob back together and reinsert the metal key.
A clicking noise when turning in your 2018 Mazda CX-5 may indicate a worn CV joint or axle. It's advisable to have the vehicle inspected by a professional mechanic to prevent further damage and ensure safe operation.
To adjust the headlights, park the vehicle on a level surface facing a wall and mark the headlight beam center on the wall. Open the hood, locate the headlight adjustment screws on the back of the headlight assembly, and turn them to achieve the desired height and alignment. Ensure the beams are not too high to avoid blinding oncoming traffic.
The recommended tire pressure for the 2018 Mazda CX-5 is typically 35 psi for both front and rear tires. However, always refer to the tire placard on the driver's side door jamb or the owner's manual for the most accurate information.