Mazda 5 2006 Maintenance Schedule Manual
![Mazda 5 2006 manual cover](/images/2643e69b1fb3dc31b398d51f/thumbs/thumb175x175.webp)
To reset the tire pressure monitoring system, ensure all tires are inflated to the correct pressure. Turn the ignition to the ON position without starting the engine, then press and hold the TPMS reset button (usually located under the steering wheel) until the TPMS indicator blinks twice.
The recommended oil type for the 2006 Mazda 5 is 5W-20 or 5W-30 API SL or ILSAC GF-4 motor oil.
Start by checking the refrigerant levels and ensure the A/C compressor is engaging. Inspect the fuses and relays related to the A/C system. If the problem persists, it may require a professional diagnostic.
Regular maintenance should include oil changes every 5,000 miles, tire rotations every 7,500 miles, and brake inspections every 15,000 miles. Refer to the owner's manual for a comprehensive schedule.
Open the glove box and remove the damper. Squeeze the sides of the glove box to release it and access the cabin air filter cover. Remove the cover and replace the old filter with a new one.
Common issues include power steering problems, noisy suspension, and sliding door malfunctions. Regular maintenance and timely repairs can mitigate these problems. For persistent issues, consult a professional mechanic.
Maintain proper tire pressure, use recommended motor oil, perform regular maintenance, and drive at moderate speeds to improve fuel efficiency. Avoid excessive idling and remove unnecessary weight from the vehicle.
Open the hood and locate the back of the headlight assembly. Remove the electrical connector and the rubber cover. Release the spring clip and replace the old bulb with a new one. Reassemble in reverse order.
Check for any obvious issues such as a loose gas cap. If the light remains on, use an OBD-II scanner to retrieve diagnostic trouble codes and address the specific issues. Consult a professional mechanic if needed.
Insert the key into the ignition and turn it to ON and back to OFF three times. Close and open the driver's door three times, ending with the door open. The car will enter programming mode, allowing you to press any button on the new key fob to program it.