Maserati Levante 2021 Owner's Main Guide

The recommended tire pressure for the Maserati Levante 2021 is typically 33 psi for the front tires and 36 psi for the rear tires. Always refer to the owner's manual or the sticker inside the driver’s door for the most accurate information.
To reset the oil change light on a Maserati Levante 2021, turn the ignition to the 'ON' position without starting the engine, press the accelerator pedal three times within 10 seconds, and then turn the ignition off. Start the car to see if the light has been reset.
The Maserati Levante 2021 typically requires SAE 5W-40 full synthetic oil. It is important to use oil that meets the Maserati specification for optimal performance.
To connect your smartphone, enable Bluetooth on your device, then select 'Phone' on the infotainment screen. Choose 'Add Device' and select your phone from the list. Follow the prompts to complete the pairing process.
To replace a headlight bulb, turn off the engine and open the hood. Locate the headlight assembly and remove the protective cover. Detach the electrical connector and unclip the bulb. Replace it with a new one and reassemble. Consult the manual for specific details.
To activate adaptive cruise control, press the 'ACC' button on the steering wheel. Use the 'SET' button to set the desired speed and adjust the following distance using the control lever.
If the engine warning light appears, it's recommended to safely pull over and turn off the engine. Check for any obvious issues such as low oil or coolant levels. If the problem persists, have the vehicle inspected by a professional mechanic.
To maintain leather seats, regularly clean them with a damp cloth and a mild leather cleaner. Apply a leather conditioner every few months to keep the leather supple and prevent cracking. Avoid prolonged exposure to direct sunlight.
To update the navigation system, download the latest map update from the Maserati website onto a USB drive. Insert the USB drive into the vehicle’s USB port and follow the on-screen instructions to install the update.
To check the brake fluid level, open the hood and locate the brake fluid reservoir. Ensure the vehicle is on a level surface. The fluid level should be between the 'MIN' and 'MAX' marks. If low, add the recommended brake fluid type.