Lorus Z009 R23 Series Instruction Manual
![Lorus Z009 R23 Series Watch manual cover](/images/udhgVKTNKDuMUGxuCwvztVRG/thumbs/thumb175x175.webp)
To set the time, pull the crown out to the second click. Rotate the crown to set the correct hour and minute. Push the crown back to its normal position once the time is set.
If your watch stops working, first check if the battery needs replacement. If the battery is fine, consider taking it to an authorized service center for further inspection.
Pull the crown out to the first click and rotate it to adjust the date. Make sure not to adjust the date between 9 PM and 3 AM to avoid damaging the mechanism.
If the watch is running slow, it could be due to a low battery or exposure to magnetic fields. Replace the battery if needed and keep the watch away from magnets.
Use a soft, damp cloth to wipe the watch case and band. Avoid using solvents or chemicals. Regularly check for any signs of wear or damage.
Check the water resistance rating of your watch. If it is rated for swimming, ensure the crown is fully pushed in and avoid pressing any buttons underwater.
Minor scratches can be polished out using a specialized watch polish. For deeper scratches, consider replacing the glass at an authorized service center.
It is recommended to service your watch every 3 to 5 years to ensure its accuracy and longevity.
To change the battery, open the back cover using the appropriate tools, remove the old battery, and replace it with a new one. Ensure the watch is resealed properly to maintain water resistance.
If the date does not change at midnight, the watch might be set 12 hours off. Adjust the time by advancing the hour hand 12 hours ahead or behind as necessary.