Lorus Y704A R23 Series Instruction Manual
![Lorus Y704A R23 Series Watch manual cover](/images/rhoyxSWvyoCHBopUWZGuVzKF/thumbs/thumb175x175.webp)
To set the time, pull the crown out to the second click. Rotate the crown to adjust the time. Push the crown back to the normal position when the correct time is set.
If the watch stops, it might be due to a depleted battery. Consider replacing the battery. If the issue persists, consult a professional watch technician.
To change the battery, open the case back with a suitable tool, remove the old battery, and insert a new one of the same type. Ensure the watch is water-resistant by properly sealing the back.
The Lorus Y704A R23 Series Watch is water-resistant up to 50 meters, suitable for swimming and showering but not for diving.
Use a soft, damp cloth to wipe the watch. Avoid exposing the watch to harsh chemicals and ensure the crown is fully pushed in to maintain water resistance during cleaning.
The date might not change if the AM/PM setting is incorrect. Ensure the hour hand is set correctly by adjusting the time forward by 12 hours.
Yes, the bracelet can be adjusted by removing or adding links. It is recommended to have this done by a professional to avoid damage.
Start the chronograph by pressing the top button. Press the same button to stop it. Reset the chronograph hand to zero by pressing the bottom button.
Regularly clean the watch and check the water resistance seals annually. Replace the battery as needed and have the watch serviced by a professional every few years.
If the crown is difficult to pull out, ensure your fingers are dry and try again. If it remains stuck, consult a professional to avoid damaging the watch.